 |
Specifications
DÉCOR-VENT™ for Soffit Ventilation
Décor-Vent™ is manufactured from James Hardie products, Hardiflex™ and Versilux™ which are asbestos FREE and approved by housing authorities and local councils.
A Décor-Vent™ system of soffit ventilation may be used with flat or pitched roofs and continues day and night with equal efficiency at no operation cost whatsoever.
ABP ALLBOARDS supply Décor-Vent™ in six standard design choices to suit all types of application. Refer to the chart below to select your design. Décor-Vent™ is manufactured specially to order and is not returnable. It should always be fixed strictly in accordance with standard building practice.
For timber framing the recommendations are to use flex sheet nails at 150mm centres with a minimum edge distance of 10mm. Maximum batten spacing should be 450mm.
Most designs can be supplied in 2 day turnaround. Further information can be supplied by phoning to speak to our fibre cement sales representative on 07 3271 5677 or using our contact form.
Sheet Sizes
Lengths : 3000 2700 2400 2100 1800 1500mm
Widths : 600 450 300mm
Thickness : 4.5mm and 6mm
Slot Width : 6.35mm
Slot Length : 40mm, 30mm space; 80mm, 30mm and 40mm space
Slot Centres: 75mm
DÉCORVENT™ Patterns
